Motorcycle is in the public eye "meat bag iron", as the body without the protection measures in motorcycle riding down the impact of happens, serious head injury, because the head at a higher and more prominent position, lead to head tend to be first or into the vehicle, and other objects, and the head in a car accident occurs, often cannot bear the traffic accident caused by the huge power.Studies have shown that helmet use can greatly reduce the death rate and reduce the injury caused by car accidents to a small extent.

How to choose a suitable helmet?Helmets are divided into;Full helmet, 3/4 helmet and half helmet, and off-road helmet.Different USES and of course different helmets.

1, full helmet is a common racing helmet, covering the head, with a high protective suitable for racing and part of the motorcycle brigade.

2. 3/4 helmets are general in protection and comfort, suitable for retro cycling or urban walking.

3. Half helmet is poor in protection, but it has good comfort and convenience, suitable for low-speed, short-distance urban transportation or vintage models.

4. The off-road helmet is unique and exaggerated.Cross-country is not about speed, so the helmet is not designed with a lot of wind resistance. The long brim can block the sun, and the goggles can block the flying sand, so the helmet is suitable for tension or pure cross-country wear.

5. The helmet and mask can be lifted to the top of the head to facilitate wearing and daily use. For example, smoking or drinking water, you don't need to take off your glasses when wearing the helmet.At low speeds, it is raised to allow air to escape, while the full helmet is closed.Of course, the structural strength of the helmet will be affected, but the difference is not too big.Suitable for motorcycle riding.

6, tension helmet, this is a combination of the above several helmet characteristics derived from the versatile helmet shape, functional utility, commonly known as tension helmet.Compared to the full helmet more jaw protection, brim, also more wind resistance shortcomings.The brim and lenses are usually detachable, as opposed to the off-road helmet, and are optimized for long rides.Suitable for pulling cross-country cycling.