Cleaning the lenses of motorcycle helmets is an important step in maintaining clear visibility while riding.
The following are detailed steps and precautions for cleaning motorcycle helmet lenses:
Cleaning steps
1、 Preliminary flushing:
Rinse the surface of the lens with clean water to remove large particles of dust and debris. This step is to avoid scratches
on the lens caused by these particles during the subsequent wiping process.
2、 Choose cleaning agent:
Use specialized helmet lens cleaner or dilute mild detergent before use. Avoid using highly irritating or corrosive cleaning
agents to avoid damaging the coating of the lens, affecting its clarity and anti fog performance.
3、 Wipe the lens:
Spray an appropriate amount of cleaning agent on the cleaning cloth instead of directly spraying it on the lens. This can
prevent uneven distribution of cleaning agents on the surface of the lens, which can lead to stripes or stains after wiping.
Use a soft cleaning cloth, such as a lens wiping cloth or super fine fiber cloth, to gently wipe the lens. Wipe in a circular
motion from the center outwards, being careful not to rub back and forth to avoid leaving scratches.
For stubborn stains, you can slightly increase the wiping force, but still keep it gentle to avoid damaging the surface of the lens
Motorcycle helmet
4、 Rinse again:
Rinse the lens with clean water again to ensure that any residue of the cleaning agent is completely removed.
This step is to avoid damage to the lens caused by residual cleaning agents, while ensuring that the surface of the
lens is clean and free of stains.
5、 Wipe off the lenses:
Gently dry the lens with a clean and soft cloth. Avoid using rough fabrics or tissues to avoid scratching the surface of the lens.
matters needing attention
1. Avoid using brushes or hard objects: Do not use brushes, vegetable cloths, or any hard objects to scrub the lens to
avoid scratching the surface of the lens.
2. Check the lenses: After cleaning, be sure to check whether the lens dirt has been removed and whether the visibility is
good. If it has not been cleared, repeat the above cleaning steps.
3. Anti fog treatment: After cleaning, a special defogging agent can be sprayed on the inside of the lens to reduce
fogging caused by temperature differences between the inside and outside.
Other suggestions
If the lens is detachable, it is recommended to remove it for cleaning, which can thoroughly remove all dirt.
The inner lining and outer shell of the helmet also need to be regularly cleaned and maintained to ensure the hygiene
and safety of the helmet.
By following the above steps and precautions, the lenses of motorcycle helmets can be effectively cleaned to maintain
clear and safe riding visibility.